< Back to WS for Lutron

Flush mounts for LUTRON Palladiom

US Style
1 Gang
2  Gang
Matte
10-01-348
10-01-363
Metal
10-01-358
10-01-367
Glass
10-01-357
10-01-365
Solid surface
10-01-353
10-01-364
Square Style
1 Column
2 Columns
Matte
10-01-349
10-01-350
Metal
10-01-503
10-01-359
Glass
10-01-501
10-01-506
Solid surface
10-01-500
10-01-505
Retrofit
 
10-01-507
Palladiom QS Thermostat
 
Matte
10-01-656
Metal
058-1-558
​Solid surface
058-1-604
Square Style 
​accessories by T&J
1 Gang
2 Gang
3 Gang
Matte
10-01-729
10-01-730
10-01-731

New Construction Mount for PALLADIOM US STYLE - MATTE

1 Gang: 10-01-348 (Spec Sheet)
2 Gang: 10-01-363 (Spec Sheet)
  • New Construction 
  • Flush with the wall.
  • Designed for ​Lutron Palladiom US Style - Matte finish
  • For 1/2" drywall. To install in 5/8" use a shim pack 10-01-067.
  • ​The adapter is supplied unpainted (To be painted after installation as part of the wall).
  • For concrete installation use concrete adapter 10-01-092 (1 Gang only)

New Construction Mount for PALLADIOM US STYLE - metal

1 Gang: 10-01-358 (Spec Sheet)
2 Gang: 10-01-367 (Spec Sheet)
  • New Construction 
  • Flush with the wall.
  • Designed for ​Lutron Palladiom US Style - Metal finish
  • For 1/2" drywall. To install in 5/8" use a shim pack 10-01-067.
  • ​The adapter is supplied unpainted (To be painted after installation as part of the wall).
  • For concrete installation use concrete adapter 10-01-092 (1 Gang only)

New Construction Mount for PALLADIOM US STYLE - glass

1 Gang: 10-01-357 (Spec Sheet)
2 Gang: 10-01-365 (Spec Sheet)
  • New Construction 
  • Flush with the wall.
  • Designed for ​Lutron Palladiom US Style - Glass finish
  • For 1/2" drywall. To install in 5/8" use a shim pack 10-01-067.
  • ​The adapter is supplied unpainted (To be painted after installation as part of the wall).
  • For concrete installation use concrete adapter 10-01-092 (1 Gang only)

solid surface Mount for palladiom us style - all finishes

1 Gang: 10-01-353 (Spec Sheet)
2 Gang: 10-01-364 (Spec Sheet)
  • Solid Surface
  • Flush with the solid surface.
  • Designed for ​all Palladiom US Style finishes (Matte, Metal, Glass)
  • Installation requires access to the back of the surface
  • Designed to be installed in 12.2 ~ 29.1mm (0.48” ~ 1.145”) thick solid boards.

New Construction Mount for PALLADIOM SQUARE STYLE - MATTE

1 Column: 10-01-349 (Spec Sheet)
2 Columns: 10-01-350 (Spec Sheet)
  • New Construction 
  • Flush with the wall.
  • Designed for ​Lutron Palladiom Square Style - Matte finish
  • For 1/2" drywall. To install in 5/8" use a shim pack 10-01-067.
  • ​The adapter is supplied unpainted (To be painted after installation as part of the wall).
  • For concrete installation use concrete adapter 10-01-521 (1 Gang & 2 Gang)

New Construction Mount for PALLADIOM SQUARE STYLE - metal

1 Column: 10-01-503 (Spec Sheet)
2 Columns: 10-01-359 (Spec Sheet)
  • New Construction 
  • Flush with the wall.
  • Designed for ​Lutron Palladiom Square Style - Metal finish
  • For 1/2" drywall. To install in 5/8" use a shim pack 10-01-067.
  • ​The adapter is supplied unpainted (To be painted after installation as part of the wall).
  • For concrete installation use concrete adapter 10-01-521 (1 Gang & 2 Gang)

New Construction Mount for PALLADIOM SQUARE STYLE - glass

1 Column: 10-01-501 (Spec Sheet)
2 Columns: 10-01-506 (Spec Sheet)
  • New Construction 
  • Flush with the wall.
  • Designed for ​Lutron Palladiom Square Style - Glass finish
  • For 1/2" drywall. To install in 5/8" use a shim pack 10-01-067.
  • ​The adapter is supplied unpainted (To be painted after installation as part of the wall).
  • For concrete installation use concrete adapter 10-01-521 (1 Gang & 2 Gang)

solid surface Mount for palladiom  SQUARE style - all finishes

1 Column: 10-01-500 (Spec Sheet)
2 Columns: 10-01-505 (Spec Sheet)
  • Solid Surface
  • Flush with the solid surface.
  • Designed for ​all Palladiom Square Style finishes (Matte, Metal, Glass)
  • Installation requires access to the back of the surface
  • Designed to be installed in 12.2 ~ 29.1mm (0.48” ~ 1.145”) thick solid boards.

RETROFIT MOUNT FOR Palladiom square style 2 columns - ALL FINISHES

10-01-507 (Spec Sheet)
  • Retrofit
  • Nearly flush with the wall (4mm [0.16”] thick on-wall thickness). 
  • Designed for Palladiom Square Style 2 Columns - all finishes (Matte, Metal, Glass)
  • Wall mount contains depth calibration mechanism.
  • Designed to be installed in board thickness ranging from ½” up to 1”.

Key properties:
  1. Dimensions: (W /H/D): 128.5mm (5.06")/ 120.8mm (4.76")/ 38.5mm (1.52”)
Open Spec Sheet

New Construction Mount for palladiom qs thermostat - matte finish

10-01-656 (Spec Sheet)
  • New Construction 
  • Flush with the wall.
  • Designed for ​Palladiom QS Thermostat - Matte finish
  • For 1/2" drywall. To install in 5/8" use a shim pack 10-01-067.
  • ​The adapter is supplied unpainted (To be painted after installation as part of the wall).

Key properties:
  1. Dimensions: (W /H/D): 165mm (6.5")/ 165mm (6.5")/ 22mm (0.87”)
Open Spec Sheet

New Construction Mount for palladiom qs thermostat - metal finish

058-1-558 
  • New Construction 
  • Flush with the wall.
  • Designed for ​Palladiom QS Thermostat - metal finish
  • For 1/2" drywall. To install in 5/8" use a shim pack 10-01-067.
  • ​The adapter is supplied unpainted (To be painted after installation as part of the wall).

Key properties:
  1. Dimensions: (W /H/D): 165mm (6.5")/ 165mm (6.5")/ 22mm (0.87”)

Solid surface Mount for palladiom qs thermostat - metal finish

058-1-604 (Spec Sheet)
  • Solid surface
  • Flush with the wall.
  • Designed for ​Palladiom QS Thermostat - Metal finish​

Key properties:
  1. Dimensions: (W /H/D): 135.06mm (5.3")/ 127.63mm (5")/ 46.6mm (1.83”)
Open Spec Sheet
058-4-604-template.dxf
File Size: 73 kb
File Type: dxf
Download File

New Construction Mount for t&j jc1401/2/3 lwh

1 Gang: 10-01-729 (Spec Sheet)
2 Gang: 10-01-730 (Spec Sheet)
3 Gang: 10-01-731 (Spec Sheet)
  • New Construction 
  • Flush with the wall.
  • Designed for ​T&J JC1401/2/3 LWH
  • For 1/2" drywall. To install in 5/8" use a shim pack 10-01-067.
  • ​The adapter is supplied unpainted (To be painted after installation as part of the wall).
  • For concrete installation use concrete adapters: 10-01-746 (1 Gang), 10-01-747 (2 Gang), 10-01-748 (3 Gang)