< Back to WS for Control4

Flush mounts for C4-WALL7-

New Construction Mount for C4-WALL7- (v2 - low voltage)

007-1-490 (Spec Sheet)
  • New Construction
  • Flush with the wall.
  • For low voltage (POE) only - line voltage connector is blocked
  • For 1/2" drywall. To install in 5/8" use a shim pack 10-01-067.
  • ​The adapter is supplied unpainted (To be painted after installation as part of the wall).
  • With speaker/mic grills. 
  • For concrete installation use concrete adapter 100-1-492

Key properties:
  • Dimensions (W/H/D): : 246.4mm (9.7")/ 195.6mm (7.7")/ 51.6mm (2.03”)
  • Power Supply: None (manual adapter).
Open Spec Sheet

New Construction Mount for C4-WALL7- (v1 - line voltage)

10-01-290 (Spec Sheet)
  • New Construction
  • Flush with the wall.
  • For 1/2" drywall. To install in 5/8" use a shim pack 10-01-067.
  • ​The adapter is supplied unpainted (To be painted after installation as part of the wall).
  • With speaker/mic grills. 
  • For concrete installation use concrete adapter 10-01-288

Key properties:
  • Dimensions (W/H/D): 285mm (11.2")/ 244mm (9.61")/ 26.9mm (1.06”)  
  • Power Supply: None (manual adapter).
Open Spec Sheet

SOLID SURFACE MOUNT FOR C4-WALL7-

10-01-669-BL/WH/WO (Spec Sheet)
  • Solid Surface
  • Flush with the solid surface.
  • Designed to be installed in 6.1 ~ 34mm (0.24” ~ 1.34”) thick solid boards.
  • Installation adapter contains depth adjustment mechanism. 
  • The bezel is supplied painted black (-BL) or white (-WH) according part number suffix ordered. The bezel may be custom ordered without paint (-WO)

Key properties:
  • Dimensions (W/H/D): 244.7mm (9.6")/ 194.2mm (7.64")/ 51.7mm (2.04”)
  • Power Supply: None (manual adapter).  ​
Open Spec Sheet
10-04-669 Routing Template DXF
File Size: 41 kb
File Type: dxf
Download File

RETROFIT MOUNT FOR C4-WALL7 - Black

10-01-767-BL (Spec Sheet)
  • Retrofit
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • With speaker/mic grills. 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied painted black (-BL)
  • Wall mount contains depth calibration screws.
  • Board thickness 10mm[0.39"] up to 21mm[0.83"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.

Key properties:
  • Dimensions: (W /H/D): 231.1mm (9.1")/ 180.6mm (7.1")/ 47mm (1.85”)
Open Spec Sheet

RETROFIT MOUNT FOR C4-WALL7 - WHITE

10-01-767-WH (Spec Sheet)
  • Retrofit
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • With speaker/mic grills. 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied painted black (-WH)
  • Wall mount contains depth calibration screws.
  • Board thickness 10mm[0.39"] up to 21mm[0.83"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.

Key properties:
  • Dimensions: (W /H/D): 231.1mm (9.1")/ 180.6mm (7.1")/ 47mm (1.85”)
Open Spec Sheet

RETROFIT MOUNT FOR C4-WALL7 - UNPAINTED

10-01-767-WO (Spec Sheet)
  • Retrofit
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • With speaker/mic grills. 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied unpainted (-WO)
  • Wall mount contains depth calibration screws.
  • Board thickness 10mm[0.39"] up to 21mm[0.83"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.

Key properties:
  • Dimensions: (W /H/D): 231.1mm (9.1")/ 180.6mm (7.1")/ 47mm (1.85”)
Open Spec Sheet