< Back to WS for Elan

flush mounts for nortek elan EL-ITP-8

New Construction Mount for nortek elan EL-ITP-8

008-1-480 (Spec Sheet)
  • New Construction
  • Flush with the wall.
  • For 1/2" drywall. To install in 5/8" use a shim pack 10-01-067
  • Includes depth calibration mechanism.
  • ​The adapter is supplied unpainted (To be painted after installation as part of the wall). 
  • With speaker/mic grills. 
  • For concrete installation use concrete adapter 10-01-131.

Key properties:
  • Dimensions (W/H/D): 274.3 mm (10.8")/ 215.9 mm (8.5")/ 43.8 mm (1.72”)
  • Power Supply: None (manual adapter). 
Open Spec Sheet

SOLID SURFACE MOUNT FOR NORTEK ELAN EL-ITP-8

008-1-481 (Spec Sheet)
  • Solid Surface
  • Flush with the solid surface.
  • For ITP8
  • Installation adapter contains depth adjustment mechanism. 
  • Designed to be installed in 8 ~ 34mm (0.31” ~ 1.33”) thick solid boards.

Key properties:
  • Dimensions (W/H/D): 260.3mm (10.25")/ 171.9mm (6.77")/ 33.5mm (1.32”)
  • Power Supply: None (manual adapter).  ​
Open Spec Sheet

RETROFIT MOUNT FOR NORTEK ELAN EL-ITP-8 - BLACK

008-1-482-BL (Spec Sheet)
  • Retrofit
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • Wall mount contains depth calibration screws.
  • Wall board thickness 10mm[0.39"] up to 22mm[0.86"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.
  • With speaker/mic grills. 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied painted black (-BL)

Key properties:
  • Dimensions: (W/H/D): 257.2mm (10.12")/ 193.6mm (7.62")/ 48mm (1.89”)
Open Spec Sheet

RETROFIT MOUNT FOR NORTEK ELAN EL-ITP-8 - white

008-1-482-WH (Spec Sheet)
  • Retrofit
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • Wall mount contains depth calibration screws.
  • Wall board thickness 10mm[0.39"] up to 22mm[0.86"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.
  • With speaker/mic grills. 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied painted white (-WH)

Key properties:
  • Dimensions: (W/H/D): 257.2mm (10.12")/ 193.6mm (7.62")/ 48mm (1.89”)
Open Spec Sheet

RETROFIT MOUNT FOR NORTEK ELAN EL-ITP-8 - UNPAINTED

008-1-482-WO (Spec Sheet)
  • Retrofit
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • Wall mount contains depth calibration screws.
  • Wall board thickness 10mm[0.39"] up to 22mm[0.86"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.
  • With speaker/mic grills. 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied painted unpainted (-WO)

Key properties:
  • Dimensions: (W/H/D): 257.2mm (10.12")/ 193.6mm (7.62")/ 48mm (1.89”)
Open Spec Sheet