< Back to WS for Elan

flush mounts for el-ITP-12

New Construction Mount for EL-ITP-12

008-1-483 (Spec Sheet)
  • New Construction
  • Flush with the wall.
  • For 1/2" drywall. To install in 5/8" use a shim pack 10-01-067
  • Includes depth calibration mechanism.
  • ​The adapter is supplied unpainted (To be painted after installation as part of the wall). 
  • With speaker/mic grills. 
  • For concrete installation use concrete adapter 100-1-502.

Key properties:
  • Dimensions (W/H/D): 268.3mm (14.5")/ 254mm (10")/ 46.2mm (1.82”)
  • Power Supply: None (manual adapter). 
Open Spec Sheet

SOLID SURFACE MOUNT FOR EL-ITP-12

008-1-484 (Spec Sheet)
  • Solid Surface
  • Flush with the solid surface.
  • Installation adapter contains depth adjustment mechanism. 
  • Designed to be installed in 12.2 ~ 36.2mm (0.48” ~ 1.42”) thick solid boards.

Key properties:
  • Dimensions (W/H/D): 356.3mm (14.03")/ 210mm (8.27")/ 35.8mm (1.41”)
  • Power Supply: None (manual adapter).  ​
Open Spec Sheet

RETROFIT MOUNT FOR EL-ITP-12 - BLACK

008-1-485-BL (Spec Sheet)
  • Retrofit
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • Wall mount contains depth calibration screws.
  • Wall board thickness 10mm[0.39"] up to 22mm[0.86"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.
  • With speaker/mic grills. 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied painted black (-BL)

Key properties:
  • Dimensions: (W/H/D): 350.5mm (13.8")/ 237.8mm (9.36")/ 50.2mm (1.976”)
Open Spec Sheet

RETROFIT MOUNT FOR EL-ITP-12 - white

008-1-485-WH (Spec Sheet)
  • Retrofit
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • Wall mount contains depth calibration screws.
  • Wall board thickness 10mm[0.39"] up to 22mm[0.86"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.
  • With speaker/mic grills. 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied painted white (-WH)

Key properties:
  • Dimensions: (W/H/D): 350.5mm (13.8")/ 237.8mm (9.36")/ 50.2mm (1.976”)
Open Spec Sheet

RETROFIT MOUNT FOR EL-ITP-12 - UNPAINTED

008-1-485-WO (Spec Sheet)
  • Retrofit
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • Wall mount contains depth calibration screws.
  • Wall board thickness 10mm[0.39"] up to 22mm[0.86"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.
  • With speaker/mic grills. 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied painted unpainted (-WO)

Key properties:
  • Dimensions: (W/H/D): 350.5mm (13.8")/ 237.8mm (9.36")/ 50.2mm (1.976”)
Open Spec Sheet