< Back to WS for Control4

Flush mounts for snap one control4 C4-T4IW10

New Construction Mount for snap one control4 C4-T4IW10

007-1-848 (Spec Sheet)
  • New Construction
  • Flush with the wall.
  • For low voltage (POE) only - line voltage connector is blocked
  • For 1/2" drywall. To install in 5/8" use a shim pack 10-01-067.
  • ​The adapter is supplied unpainted (To be painted after installation as part of the wall).
  • With speaker/mic grills. 
  • For concrete installation use concrete adapter 100-1-791

Key properties:
  • Dimensions (W/H/D): 320mm (12.6")/ 255mm (10.04")/ 44mm (1.73”)
  • Power Supply: None (manual adapter).
Open Spec Sheet

SOLID SURFACE MOUNT FOR SNAP ONE CONTROL4 C4-T4IW10

007-1-849 (Spec Sheet)
  • Solid Surface
  • Flush with the solid surface.
  • For low voltage (POE) only - line voltage connector is blocked.
  • Designed to be installed in 7.5 ~ 33.5mm (0.29” ~ 1.32”) thick solid boards.
  • Installation adapter contains depth adjustment mechanism. 
  • Does not include audio grills!

Key properties:
  • Dimensions (W/H/D):  279.8mm (11.01")/ 215mm (8.46")/
    37.8mm (1.49”)
  • Power Supply: None (manual adapter).  ​
Open Spec Sheet
007-1-849-template.zip
File Size: 10 kb
File Type: zip
Download File

RETROFIT MOUNT FOR SNAP ONE CONTROL4 C4-T4IW10 - Black

007-1-850-BL (Spec Sheet)
  • Retrofit
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • For low voltage (POE) only - line voltage connector is blocked
  • Does not require control4 back box.
  • With speaker/mic grills. 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied painted black (-BL)
  • Wall mount contains depth calibration screws.
  • Board thickness 10mm[0.39"] up to 21mm[0.83"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.

Key properties:
  • Dimensions: (W /H/D): 300.4mm (11.83")/ 223.6mm (8.8")/ 48mm (1.89”)
Open Spec Sheet

RETROFIT MOUNT FOR SNAP ONE CONTROL4 C4-T4IW10 - WHITE

007-1-850-WH (Spec Sheet)
  • Retrofit
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • For low voltage (POE) only - line voltage connector is blocked
  • Does not require control4 back box.
  • With speaker/mic grills. 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied painted white (-WH)
  • Wall mount contains depth calibration screws.
  • Board thickness 10mm[0.39"] up to 21mm[0.83"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.

Key properties:
  • Dimensions: (W /H/D): 300.4mm (11.83")/ 223.6mm (8.8")/ 48mm (1.89”)
Open Spec Sheet

RETROFIT MOUNT FOR SNAP ONE CONTROL4 C4-T4IW10 - UNPAINTED

007-1-850-WO (Spec Sheet)
  • Retrofit
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • For low voltage (POE) only - line voltage connector is blocked
  • Does not require control4 back box.
  • With speaker/mic grills. 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied unpainted (-WO)
  • Wall mount contains depth calibration screws.
  • Board thickness 10mm[0.39"] up to 21mm[0.83"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.

Key properties:
  • Dimensions: (W /H/D): 300.4mm (11.83")/ 223.6mm (8.8")/ 48mm (1.89”)
Open Spec Sheet