< Back to WS for Control4

Flush mounts for snap one control4 C4-WALL10-

New Construction Mount for control4 C4-WALL10- (V2- LOW VOLTAGE) - END OF LIFE

007-1-491 (Spec Sheet)
  • New Construction
  • Flush with the wall.
  • For low voltage (POE) only - line voltage connector is blocked
  • For 1/2" drywall. To install in 5/8" use a shim pack 10-01-067.
  • ​The adapter is supplied unpainted (To be painted after installation as part of the wall).
  • With speaker/mic grills. 
  • For concrete installation use concrete adapter 100-1-493

Key properties:
  • Dimensions (W/H/D): 312.4mm (12.5")/ 238.8mm (9.4")/ 51.6mm (2.03”)
  • Power Supply: None (manual adapter).
Open Spec Sheet

New Construction Mount for CONTROL4 C4-WALL10- (V1 - LINE VOLTAGE) - END OF LIFE

10-01-291 (Spec Sheet)
  • New Construction
  • Flush with the wall.
  • For 1/2" drywall. To install in 5/8" use a shim pack 10-01-067.
  • ​The adapter is supplied unpainted (To be painted after installation as part of the wall).
  • With speaker/mic grills. 
  • For concrete installation use concrete adapter 10-01-289

Key properties:
  • Dimensions (W/H/D): 353mm (13.9")/ 288mm (11.34")/ 26.6mm (1.05”)
  • Power Supply: None (manual adapter).
Open Spec Sheet

SOLID SURFACE MOUNT V2 FOR CONTROL4 C4-WALL10- (low voltage, without grills) - END OF LIFE

007-1-495 (Spec Sheet)
  • Solid Surface
  • Flush with the solid surface.
  • For low voltage (POE) only - line voltage connector is blocked.
  • Designed to be installed in 10.6 ~ 45mm (0.417” ~ 1.77”) thick solid boards.
  • Installation adapter contains depth adjustment mechanism. 
  • Does not include audio grills!

Key properties:
  • Dimensions (W/H/D):  278mm (10.9")/ 204.6mm (8.1")/
    50mm (1.97”)
  • Power Supply: None (manual adapter).  ​
Open Spec Sheet
007-04-495-template.dxf
File Size: 74 kb
File Type: dxf
Download File

SOLID SURFACE MOUNT v1 FOR CONTROL4 C4-WALL10- (line voltage, with grills) - END OF LIFE

10-01-700-BL/WH/WO (Spec Sheet)
  • Solid Surface
  • Flush with the solid surface.
  • Designed to be installed in 6.1 ~ 34mm (0.24” ~ 1.34”) thick solid boards.
  • Installation adapter contains depth adjustment mechanism. 
  • The bezel is supplied painted black (-BL) or white (-WH) according part number suffix ordered. The bezel may be custom ordered without paint (-WO)

Key properties:
  • Dimensions (W/H/D):  311mm (12.2")/ 237.6mm (9.35")/
    51.7mm (2.04”)
  • Power Supply: None (manual adapter).  ​
Open Spec Sheet
10-04-700 Routing Template DXF
File Size: 43 kb
File Type: dxf
Download File

RETROFIT MOUNT FOR CONTROL4 C4-WALL10 - Black - END OF LIFE

007-1-685-BL (Spec Sheet)
  • Retrofit
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • For low voltage (POE) only - line voltage connector is blocked
  • Does not require control4 back box.
  • With speaker/mic grills. 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied painted black (-BL)
  • Wall mount contains depth calibration screws.
  • Board thickness 10mm[0.39"] up to 21mm[0.83"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.

Key properties:
  • Dimensions: (W /H/D): 297.4mm (11.71")/ 224mm (8.8")/ 47mm (1.85”)
Open Spec Sheet

RETROFIT MOUNT V4 FOR CONTROL4 C4-WALL10 (low voltage) - WHITE - END OF LIFE

007-1-685-WH (Spec Sheet)
  • Retrofit
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • For low voltage (POE) only - line voltage connector is blocked
  • Does not require control4 back box.
  • With speaker/mic grills. 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied painted white (-WH)
  • Wall mount contains depth calibration screws.
  • Board thickness 10mm[0.39"] up to 21mm[0.83"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.

Key properties:
  • Dimensions: (W /H/D): 297.4mm (11.71")/ 224mm (8.8")/
    47mm (1.85”)
Open Spec Sheet

RETROFIT MOUNT FOR CONTROL4 C4-WALL10 - UNPAINTED - END OF LIFE

007-1-685-WO (Spec Sheet)
  • Retrofit
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • For low voltage (POE) only - line voltage connector is blocked
  • Does not require control4 back box.
  • With speaker/mic grills. 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied unpainted (-WO)
  • Wall mount contains depth calibration screws.
  • Board thickness 10mm[0.39"] up to 21mm[0.83"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.

Key properties:
  • Dimensions: (W /H/D): 297.4mm (11.71")/ 224mm (8.8")/ 47mm (1.85”)
Open Spec Sheet