< Back to WS for RTI

flush mounts for RTI ka8

New Construction Mount for KA8

027-1-486 (Spec Sheet)
  • New Construction.
  • Flush with the wall.
  • For KA8
  • For 1/2" drywall. To install in 5/8" use a shim pack 10-01-067
  • Includes depth calibration mechanism.
  • ​The adapter is supplied unpainted (To be painted after installation as part of the wall). 
  • With speaker/mic grills. 
  • For concrete installation use concrete adapter 10-01-446

Key properties:
  • Dimensions (W/H/D): 299.3mm (11.78")/ 224.3mm (8.83")/ 46.2mm (1.82”)
  • Power Supply: None (manual adapter). 
Open Spec Sheet

SOLID SURFACE MOUNT FOR KA8

027-1-487 (Spec Sheet Not Available)
  • Solid Surface
  • Flush with the solid surface.
  • For KA8
  • Designed to be installed in 6.2~ 41.2mm (0.244” ~ 1.62”) thick solid boards.
  • Installation adapter contains depth adjustment mechanism. 

Key properties:
  • Dimensions (W/H/D):  255.3mm (10.1")/ 180.3mm (7.1")/  35.8mm (1.41”)
  • Power Supply: None (manual adapter).  ​
Routing Template DXF
File Size: 40 kb
File Type: dxf
Download File

RETROFIT MOUNT FOR KA8 - BLACK

027-1-488-BL (Spec Sheet)
  • Retrofit
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • Wall mount contains depth calibration screws.
  • Wall board thickness 10mm[0.39"] up to 21mm[0.83"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.
  • With speaker/mic grills. 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied painted black (-BL)

Key properties:
  • Dimensions: (W /H/D):  277.3mm (10.92")/ 202.3mm (7.96")/  46.8mm (1.84”) 
Open Spec Sheet

RETROFIT MOUNT FOR KA8 - white

027-1-488-WH (Spec Sheet)
  • Retrofit
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • Wall mount contains depth calibration screws.
  • Wall board thickness 10mm[0.39"] up to 21mm[0.83"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.
  • With speaker/mic grills. 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied painted white (-WH)

Key properties:
  • Dimensions: (W /H/D): 277.3mm (10.92")/ 202.3mm (7.96")/  46.8mm (1.84”)
Open Spec Sheet

RETROFIT MOUNT FOR ka8 - UNPAINTED

027-1-488-WO (Spec Sheet)
  • Retrofit
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • Wall mount contains depth calibration screws.
  • Wall board thickness 10mm[0.39"] up to 21mm[0.83"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.
  • With speaker/mic grills. 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied painted unpainted (-WO)
Key properties:
  • Dimensions: (W /H/D): 277.3mm (10.92")/ 202.3mm (7.96")/  46.8mm (1.84”)
Open Spec Sheet