< Back to WS for Control4

Flush mounts for c4-t4iw8

New Construction Mount for C4-t4iw8

007-1-845 (Spec Sheet)
  • New Construction
  • Flush with the wall.
  • For low voltage (POE) only - line voltage connector is blocked
  • For 1/2" drywall. To install in 5/8" use a shim pack 10-01-067.
  • ​The adapter is supplied unpainted (To be painted after installation as part of the wall).
  • With speaker/mic grills. 
  • For concrete installation use concrete adapter 100-1-790

Key properties:
  • Dimensions (W/H/D): 267mm (10.51")/ 227mm (8.94")/ 44mm (1.73”)
  • Power Supply: None (manual adapter).
Open Spec Sheet

SOLID SURFACE MOUNT C4-T4IW8

007-1-846 (Spec Sheet)
  • Solid Surface
  • Flush with the solid surface.
  • For low voltage (POE) only - line voltage connector is blocked.
  • Designed to be installed in 7.5 ~ 33.5mm (0.29” ~ 1.32”) thick solid boards.
  • Installation adapter contains depth adjustment mechanism. 
  • Does not include audio grills!

Key properties:
  • Dimensions (W/H/D): 235.2mm (9.26")/ 187mm (7.36")/ 37.8mm (1.49”)
  • Power Supply: None (manual adapter).  ​
Open Spec Sheet
007-1-846-template.dxf
File Size: 83 kb
File Type: dxf
Download File

RETROFIT MOUNT FOR C4-T4IW8 - Black

007-1-847-BL (Spec Sheet)
  • Retrofit​
  • For low voltage (POE) only - line voltage connector is blocked
  • Does not require control4 back box.​
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • With speaker/mic grills. 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied painted black (-BL)
  • Wall mount contains depth calibration screws.
  • Board thickness 10mm[0.39"] up to 21mm[0.83"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.

Key properties:
  • Dimensions: (W /H/D): 256mm (10.08)/ 195.8mm (7.71")/ 48mm (1.89”)
Open Spec Sheet

RETROFIT MOUNT FOR C4-T4IW8 - WHITE

007-1-847-WH (Spec Sheet)
  • Retrofit​
  • For low voltage (POE) only - line voltage connector is blocked
  • Does not require control4 back box.​
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • With speaker/mic grills. 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied painted white (-WH)
  • Wall mount contains depth calibration screws.
  • Board thickness 10mm[0.39"] up to 21mm[0.83"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.

Key properties:
  • Dimensions: (W /H/D): 256mm (10.08)/ 195.8mm (7.71")/ 48mm (1.89”)
Open Spec Sheet
White hues of the screen and bezel in the photos are not final!

RETROFIT MOUNT FOR C4-T4IW8 - UNPAINTED

007-1-847-WO (Spec Sheet)
  • Retrofit​
  • For low voltage (POE) only - line voltage connector is blocked
  • Does not require control4 back box.​
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • With speaker/mic grills. 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied unpainted (-WO)
  • Wall mount contains depth calibration screws.
  • Board thickness 10mm[0.39"] up to 21mm[0.83"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.

Key properties:
  • Dimensions: (W /H/D): 256mm (10.08)/ 195.8mm (7.71")/ 48mm (1.89”)
Open Spec Sheet