< Back to WS for iPad Air 3

invisible mounts for ipad7 (10.2") & air 3

invisible mount for ipad7 & iPad air3  - NO grills

002-1-614-NG (Spec Sheet)
  • New Construction
  • Flush with the wall.
  • For iPad7 (10.2") and iPad Air3
  • For 1/2" drywall. To install in 5/8" use a shim pack 10-01-067
  • Wall mount may be mounted in any orientation.
  • No speaker/mic grills. 
  • For concrete installation use concrete adapter 100-1-619

Key properties:
  • Dimensions: (W/H/D): 327.7mm (12.9")/ 243.8mm (9.6")/ 42mm (1.65​”)
  • Power Supply: Wall mount includes POE to USB converter. The installer should connect the wall mount to an IEEE 802.3at POE+ power source via CAT6 cable and RJ45 connector.
Open Spec Sheet

invisible mount for ipad7 & ipad air3 - WITH grills

002-1-614-WG (Spec Sheet)
  • New Construction
  • Flush with the wall.
  • For iPad7 (10.2") and iPad Air3
  • For 1/2" drywall. To install in 5/8" use a shim pack 10-01-067
  • Wall mount may be mounted in any orientation.
  • With speaker/mic grills. 
  • For concrete installation use concrete adapter 100-1-619

Key properties:
  • Dimensions: (W/H/D): 327.7mm (12.9")/ 243.8mm (9.6")/ 42mm (1.65​”)
  • Power Supply: Wall mount includes POE to USB converter. The installer should connect the wall mount to an IEEE 802.3at POE+ power source via CAT6 cable and RJ45 connector.
Open Spec Sheet
iPad® is a trademark of Apple Inc., registered in the U.S. and other countries.​