< Back to WS for Control4

Flush mounts for control4 c4-t5iw8

New Construction Mount for control4 C4-t5iw8

007-1NA40 (Spec Sheet)
  • New Construction
  • Flush with the wall.
  • Does not require control4 back box.​
  • For 1/2" drywall. To install in 5/8" use a shim pack 10-01-067.
  • ​The adapter is supplied unpainted (To be painted after installation as part of the wall).
  • For concrete installation use concrete adapter 100-1-789
  • Dimensions: (W/H/D): 325.88mm (12.83")/ 240.03mm (9.45")/ 44(1.73”)
  • Power Supply: None (manual adapter).
007-4na40-spc.pdf
File Size: 262 kb
File Type: pdf
Download File

RETROFIT MOUNT FOR CONTROL4 C4-T5IW8 - Black 

007-1RA42-BL (Spec Sheet)
  • Retrofit​
  • Does not require control4 back box.​
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied painted black (-BL)
  • Wall mount contains depth calibration screws.
  • Board thickness 10mm[0.39"] up to 21mm[0.83"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.
  • Dimensions: (W/H/D): 254.1mm (10")/ 190.5mm (7.5")/ 48mm (1.89”)
    ​
007-4ra42-spc.pdf
File Size: 334 kb
File Type: pdf
Download File

RETROFIT MOUNT FOR CONTROL4 C4-T5IW8 - UNPAINTED 

007-1RA42-WO (Spec Sheet)
  • Retrofit​
  • Does not require control4 back box.​
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied unpainted (-WO)
  • Wall mount contains depth calibration screws.
  • Board thickness 10mm[0.39"] up to 21mm[0.83"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down. ​
  • Dimensions:(W/H/D): 254.1mm (10")/ 190.5mm (7.5")/ 48mm (1.89”)
007-4ra42-spc.pdf
File Size: 334 kb
File Type: pdf
Download File