< Back to WS for Control4

Flush mounts for control4 C4-T5IW11

New Construction Mount for control4 C4-T5IW11

007-1NA43 (Spec Sheet)
  • New Construction
  • Flush with the wall.
  • For 1/2" drywall. To install in 5/8" use a shim pack 10-01-067.
  • ​The adapter is supplied unpainted (To be painted after installation as part of the wall).
  • For concrete installation use concrete adapter 100-1BA84
  • Dimensions:(W/H/D): 352.4mm (13.87")/ 285.08mm (11.22")/ 44(1.73”)
  • Power Supply: None (manual adapter).
007-4na43-spc.pdf
File Size: 262 kb
File Type: pdf
Download File

RETROFIT MOUNT FOR CONTROL4 C4-T5IW11 - Black ​

007-1RA45-BL (Spec Sheet)
  • Retrofit
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • Does not require control4 back box.
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied painted black (-BL)
  • Wall mount contains depth calibration screws.
  • Board thickness 10mm[0.39"] up to 21mm[0.83"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.
  • Dimensions: (W/H/D): 311.4mm (12.26")/ 227.5mm (8.96")/ 48mm
    (1.89”)
007-4ra45-spc.pdf
File Size: 333 kb
File Type: pdf
Download File

RETROFIT MOUNT FOR CONTROL4 C4-T5IW11 - UNPAINTED 

007-1RA45-WO (Spec Sheet)
  • Retrofit
  • Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
  • Does not require control4 back box.
  • Bezel attaches magnetically to the retrofit wall mount base. 
  • The bezel is supplied unpainted (-WO)
  • Wall mount contains depth calibration screws.
  • Board thickness 10mm[0.39"] up to 21mm[0.83"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.
  • Dimensions:  (W/H/D): 311.4mm (12.26")/ 227.5mm (8.96")/ 48mm
    (1.89”)
007-4ra45-spc.pdf
File Size: 333 kb
File Type: pdf
Download File